You have no items in your shopping cart.
Each strong neodymium magnet is housed in a thin steel cup, all within a square plastic pouch. The sealed pouch helps distribute tearing and pulling forces over a wider surface. This helps prevent the magnets from tearing through the fabric or other base material.
How to use: Simply sew or embed one + magnet and one – into to create closure. Be sure to match flat side to flat side for best results.
Important: When sewing into place, only stitch within the textured edges of the plastic pouch. Stitching too close to the magnet can break the seal.
SKU | MSEW34x116 |
---|---|
Color | None |
Magnetic Material | Neodymium (NdFeB) |
Grade | No |
Coating | Zinc |
Diameter/Length (in) | 0.00 |
Diameter/Length Fractional) | No |
Width (in) | 0.00 |
Width (fFractional) | No |
Width (mm) | 0.00 |
Thickness (in) | 0.00 |
Thickness (Fraction) | No |
Diameter/Length (mm) | 0.00 |
Thickness (mm) | 0.00 |
Pull Force (pounds) | No |
Maximum Operating Temperature (F) | 176 |
Magnetization Direction | Not Applicable |